FLAWTECH-WFU-VK-2 Prior to Weld Fit-Up Joint Specimen Visual Kit

$6,100.00 $5,795.00

FLAWTECH-WFU-VK-2 Prior to Weld Fit-Up Joint Specimen Visual Kit

Qty: Total 8 specimens (2 each specimen type) Specimen Type:

  • Pipe Open Root Specimen    
    • Material: A106B, 4" Sch80 Pipe x 6" long
    • Specimen Specification: (below conditions may or may not be found in each specimen)
      Open Root Gap from 0.0625" to 0.1875" at various areas
      Root Bevel Land from 0" to 0.125" at various areas
      Bevel Included Angle of 60° to 40° at various areas
      Pipe-to-Pipe Offset of 0.0312" at various areas        
  • Pipe Closed Root Specimen w/ Consumable Inserto    
    • Material: A106 B 4" Sch80 Pipe x 6" long
    • Specimen Specification: (below conditions may or may not be found in each specimen)
      Open Root Gap from 0.0625" to 0.1875" at various areas
      Root Bevel Land from 0" to 0.125" at various areas
      Bevel Included Angle of 60° to 40° at various areas
      0" to 0.0625" Gap between Consumable Insert and Pipe ID/Root        
  • Pipe To Socket Joint Specimen
    • Material: A106 B 4" Sch80 Pipe x 6" long welded to 4" A105 Socket Coupling
    • Specimen Specification: (below conditions may or may not be found in each specimen)
      Pipe-to-Socket (diametrical clearance) of 0" to 0.0625" at various areas
      Pipe Internal Gap Withdraw of 0.25"
      External Socket 0.5" Reference Scribe Mark from fitting edge @ 4 places (3 correct and 1 incorrect - less than 0.5")  
      Uneven Pipe End Cut, uneven by 0" to 0.125" at various areas
  • Plate Joint Specimen
    • Material: A36, 4" x 6" x 0.375
    • Specimen Specification: (below conditions may or may not be found in each specimen)
      One specimen will contain a Open Root Single V Groove and one specimen will contain Open Root Single Bevel Groove.
      Root Gap of 0.0625" to 0.25"Root Bevel Land of 0" to 0.0937" at various areas
      Bevel Included Angle of 45° to 30° at various areas  

Kit Details:

  • Mil-Std-22d page 65, P-73 for Consumable Insert was referenced for Pipe Closed Root Specimen.
  • All final joint edges to be finished by hand grinding.
  • Tolerance: Target +/- 0.080"
  • Documentation: C of C, “As Built" CAD, Measuring & Test Equipment Certificates.
  • Carrying Case: Included (Rolling & Lockable)
  • Kit Weight & Dimensions: ~110LBS, 24" x 16" x 10" (special shipping considerations may apply)

Reviews